Blog

Semiconductor laser therapy instrument is a device for medical treatment and rehabilitation using semiconductor laser technology. The following is a detailed introduction to the semiconductor […]

Tortai presented a unique and exciting performance at the Munchen Shanghai Electronics Show at the Shanghai National Convention and Exhibition Center. This exhibition gathered domestic

The PCBA coating thickness standard requires that the normal thickness of the coating of most circuit board products is 25 to 127 microns, and some

Card board is in the electronic assembly (PCBA) manufacturing reflow soldering process production practices are more common failure phenomenon, but for the vacuum reflow soldering,

Tortai made an exciting appearance at the International Medical Device Design and Manufacturing Technology Exhibition at the Suzhou International Expo Centre, attracting many visitors. The

(Balasore) – India’s worst train derailment collision of the century was the result of a signal failure, according to a preliminary investigation by the railroad

What is a weld cavity? Why do weld voids occur? What should I do about solder voids? During a recent trial production phase of a

1、The three-proof work should be carried out in a separate room, but not completely enclosed, and must have good ventilation facilities. 2、Smoking, drinking food and

PCBA circuit board three-proof paint can effectively achieve insulation, moisture-proof, anti-leakage, anti-vibration, dust-proof, salt spray and other protection effects, so as to enhance the reliability