+86 (0)137 9031 2031 Dongguan, China

PCB Assembly FAQ

As one of the most cost-effective and high quality PCB Assembly service provider, we are having several engineers using our services for their research work. We are answering questions from around the world on the daily basis concerning their PCB and assembly business. We aggregate these questions for our new customers to know about our product and service.

Q1: Is there a minimum order size for turn-key orders?

No. We have no restrictions on your order size. However, larger orders are more cost effective. We would like to have your target price to help us find a good solution for your specific needs in cost reduction.

Q2: What is the lead time on a turn-key order?

No. We have no restrictions on your order size. However, larger orders are more cost effective. We would like to have your target price to help us find a good solution for your specific needs in cost reduction.

Q3: What files and documents do you request for my PCBA orders?

We need Gerber files, Centroid data and BOM for your PCBA orders. As have already placed your PCB order with us, actually you only need to send the latter two if your PCB Gerber files have included the layers of silkscreen, copper track and solder paste. If your PCB Gerber files are missing any of the above-mentioned three layers, please resend them, as this is the minimum request for PCBA. For the best possible result, please also send assembly drawings, instructions and photos to us to avoid any ambiguous and even mistaken placement of parts, though these are not required by most of the assemblers.

Q4: What is Centroid?

Centroid is the special file for assembly used for quickly programming the assembly machines. This is also known as aka Insertion, Pick-N-Place, or XY Data. Some of the CAD tools will automatically generate this file and some not, but you may need to modify the file and then generate the Centroid file. The Centroid file describes the position and orientation of all the surface mount parts, which includes the reference designator, X and Y position, rotation and side of Board (Top or Bottom). Only surface mounting parts are listed in the Centroid.

Q5: How do you request for the shipping and marking of the parts for the consigned or kitted order??

We hope you can mark on any individual package or box with the corresponding line number on BOM, manufacturer’s part# or customer’s part#, quantities. A detailed packing list is preferred to enable us to count and check upon receipt of your parts.

Q6: What is your requirement on the parts overages for consigned/kitted PCBA?

Proper SMT machine setup and operation requires parts overages. Unused and excessive parts supplied by you or purchased by us will be packaged and returned to you with the assembled boards. SMT parts which are not supplied on reels should be on one continuous strip of tape. If you need to assemble the same SMT part in different boards, do not cut them into strips, please keep them in the continuous strip of tape or on the reels.Resistors, Capacitors, Diodes (0603, 0805, 1206, 2225, SOT, SOD, MELF - packages) require a minimum of 50 pieces and have to exceed the required quantity by 30 pieces. (e.g.: assemble quantity 40 pieces – we will need 70 pieces – this meets our minimum of 50 pieces plus 30 pieces over assemble quantity). Resistors, Capacitors, Diodes (0201, 0402, miniMelf, miniature packages) require a minimum of 100 pieces have to exceed the required quantity by 50 pieces. (e.g.: assemble quantity 80 pieces – we will need 130 pieces- this meets our minimum of 100 pieces plus 50 pieces over assemble quantity). A small number of excess(1-5 pieces based on the total quantity of assemblies) is requested for expensive parts such as IC, BGA, QFP, Connectors, etc., this will ensure smooth assembling and shipping your assembled boards on time. If you have any question or doubt, please send more extra or contact us for answers.

Q7: Can you source some parts for my assembly

Yes. This practice is called partial Turn-key. You can supply some parts, and we source the rest of the parts on your behalf. We will ask for your approval for anything that is not sure at our side. In case parts crossing or substitution is needed, we will again ask for your final approval.

Q8: Do you assemble BGA? Any special requirement on this?

Yes, We have the ability to handle BGA of 0.25mm pitch with X-ray testing. For BGAs, we need to tent any vias under the BGAs with solder mask to ensure the soldering quality.

Q9: How do you handle the excessive and unused parts?

Excessive parts do exist because we will ask for some percentage of overage for consigned/kitted orders, or we will buy more for the same purpose for those Turn-key orders. You can either ask us to ship back to you these unused parts together with the loaded boards, or keep them in our shelf for your next order. All up to you.

Q10: When does the turn-time begin?

Due to the complexity of how to determine the turn time of PCBA services, our policy is that turn-time begins immediately after all the parts and PCBs are ready and all the PCB files (Gerber files/other PCB files, etc.,) , Centroid (Pick & Place PNP file, or XY Data or files in other formats), BOM, and all other necessary data or documents/images/photos are complete for our assembly work.

Q11: Is your assembly RoHS Compliant?

Yes. All of the materials are RoHs compliant.

Q12: Do you test the finished product?

In general, all products will be tested, but this requires the customer to provide the corresponding test method or test fixture.If the customer is not able to provide these, we can only conduct AOI appearance inspection to ensure there is no shortage of materials, or polarity reverse problem.For some products that can be tested by ICT when designed, we will use ICT for testing.

Q13: What if I find any defects or problems after I received your assembled boards?

Defects and problems may occur from time to time, as PCBA is a complex work which involves many details. If you find any defects or problems, please let us know immediately, and we will evaluate and review the problems, and we will make a decision of how to remedy. We will either repair/rework or remake your boards. In case we need the defective boards, we may ask you to send them back to us. We guarantee a functional board in your hand!

Q14: What are your PCB Assembly standards?

IPC-A-610 Class 2.