+86 (0)137 9031 2031 Dongguan, China
News
  • SMT Chip Processing The Future Trend

    The SMT Industry Revolution is now an interesting time to change technology and industry practices. For more than 50 years, welding has proven to be a reliable and effective electronic coupling process. However, pursuing human resources capable of handling new materials, soldering temperature, electrical characteristics, mechanical strength and oth...
    2020-5-30 9:27:48  admin   10
  • PCB Assembly Process Requirements

    1, after the PCB assembly welding, that serial number (+ serial number) completed in advance. Write a note in front of the blackboard with a marker. Token handling losses, additional locations (number of normal 96 nee dles on the looper) and the same number of plates to prevent the cleaning process. For ease of management, always keep this number. ...
    2020-5-30 9:3:48  admin   12
  • What Is Smt Patch Processing

    Briefly, the processing element of the SMT chip is to pass through the device connected to the paste printed on the PCB solder paste or adhesive by welding furnace in chip processing.This is not important and SMT's process control is keyWhat effect smt patch handling:For surface mount components, accurately attach the PCB to the fixed position....
    2020-5-23 9:33:6  admin   28
  • Solution of through-hole blockage in the process of pcb boards manufacturing.

    Conductive hole Via hole, also known as conductive hole, in order to meet customer requirements, circuit board through hole must be plugged, after a lot of practice, change the traditional aluminum sheet plug hole technology, use white net to complete circuit board surface resistance welding and plug hole. Stable production and reliable quality. Vi...
    2020-5-21 10:36:22  admin   19
  • SMT Chip Processing The Future Trend

    The SMT Industry Revolution is now an interesting time to change technology and industry practices. For more than 50 years, welding has proven to be a reliable and effective electronic coupling process. However, pursuing human resources capable of handling new materials, soldering temperature, electrical characteristics, mechanical strength and oth...
    2020-5-15 13:30:8  admin   15
  • The standard of PCB board

    What are the standards of PCB circuit boards? Let's look at them together.1. The shape should be as close to square as possible. It is recommended to use 2×2, 3×3,... but don’t spell yin and yang plates.2, PCB board panel width ≤ 260mm (SIEMENS line) or ≤ 300mm (FUJI line); if you need automatic dispensing, PCB board width × length ≤ 125 mm ...
    2020-5-14 10:58:24  admin   10
  • Important Considerations for Pads in PCB Design: Pad Cratering Prevention

    I think craters in all forms should be accompanied by that level of frantic energy. On a PCB, pad cratering sounds like it should be caused by tiny flaming meteorites, or something comparably dramatic. In reality, the “craters” result from a pad separating from the surface of the PCB, and leaving behind a divot in the laminate. You can be sure the ...
    2020-5-7 11:43:1  admin   15
  • Surface Mount (SMT) PCB Assembly,low volums,prototypes,mass production

    Surface Mount (SMT) PCB AssemblyGaotuo is an experienced SMT assembly house. We have been assembling SMT designs for over ten years now, and we take pride in the work we perform. Our employees are highly trained and considered professionals in the field. Here are some details about our services in surface mount assembly. We work with both smt proto...
    2020-5-7 11:18:26  admin   17
  • Global trade evolution and China

    I just read a report by Standard Chartered Bank about the evolution of World trade: “Global trade unbundled”. It gives views on how global trade will evolve after the great financial crisis. But it also provides interesting data and views on China trade itself.I am quoting here some points from the report that are valuable for people actively sourc...
    2020-4-23 15:51:41  admin   13
  • How to Calculate PCB Impedance Control for Your Circuit Board

    Science and mathematics are indeed based on precision, or the ability to assign an accurate measurable value to items, actions, and events. Even so, imponderables still remain and must be addressed when analyzing, designing, and building physical systems. A common one that permeates through most scientific, mathematic, and engineering work is the H...
    2020-4-23 10:35:24  admin   16
  • 5 Things to Consider for Box Build Assembly Process

    Box-build, which is also referred to as systems integration, is an assembly work other than a printed circuit board (PCB) production. It is an electromechanical assembly process, which includes enclosure fabrication, installation and routing of cabling or wire harnesses, and installation of sub-assemblies and components. The box build can mean a PC...
    2020-4-14 14:57:9  admin   28
  • Electronic Manufacturing Services (EMS) Information

    Electronic Manufacturing Services (EMS) Information Electronic manufacturing services (EMS) are provided by companies that design, assemble, produce, and test electronic components and printed circuit board (PCB) assemblies for original equipment manufacturers (OEMs). EMS companies may provide a variety of manufacturing services, including desig...
    2020-4-14 9:36:15  admin   21